Maxim Integrated 73M1866B/73M1966B FXOAPI User Manual
Maxim Integrated Hardware
Table of contents
Document Outline
- 1 Introduction
- 2 API Descriptions
- 2.1.1 M1x66_HookSwitch
- 2.2 FXO API Initialization and Termination
- 2.3 Device/Channel Open, Close and Initialization APIs
- 2.4 PCM Management and Control APIs
- 2.5 Hook Switch and Pulse Dial Related APIs
- 2.6 This API terminates any active pulse dial session previously initiated by the
- 2.7 GPIO Management APIs
- 2.8 Loopback Control APIs
- 2.9 Country Default Parameter and Override APIs
- 2.10 Billing Tone Filter Control APIs
- 2.11 1x66 H/W Register Access and Debugging aid APIs
- 2.12 Interval Event Table Management APIs
- 2.13 Current/Voltage Measurement APIs
- 2.14 Miscellaneous Channel Setting APIs
- 3 Structure Reference
- 4 Enumerator Reference
- 4.1 M1x66_RET
- 4.2 M1x66_EVENT_ID
- 4.3 M1x66_COUNTRY_CODE
- 4.4 M1x66_DCL_FREQUENCY
- 4.5 M1x66_HOOK_SWITCH
- 4.6 M1x66_REG_TYPE
- 4.7 M1x66_REG_ACCESS_TYPE
- 4.8 M1966_GPIO_NUMBER
- 4.9 M1966_GPIO_CONFIG_COMMAND
- 4.10 M1966_GPIO_CONTROL_TYPE
- 4.11 M1966_GPIO_DATA_COMMAND
- 4.12 M1966_GPIO_DATA_TYPE
- 4.13 M1966_GPIO_SIGNAL_DIRECTION
- 4.14 M1966_GPIO_INTR_POLARITY
- 4.15 M1x66_DEBUG_TRACE_MASK
- 5 Sample Application
- 6 Related Documentation
- 7 Contact Information
- Revision History