Crisp Solutions UCommand-525 - Manual (Page 35)

— Operating the UC-525
31
Toggling the Beep Signal On/Off
This function toggles the beep signal off and on. To turn off the beep
signal, press the active device button (or press any device button
twice). To turn it back on, press the active device button again.
Figure 3-2: Turning off the beep signal
Recalling the Original LCD Layout
You can reset the LCD panel buttons to their original factory con-
figuration. Any configuration changes you have made will be lost.
The learned codes are not deleted; to delete those,
refer to “‘Using the Delete Function”
To recall the original LCD layout, press the TV and DVD device but-
tons at the same time for five seconds:
UC-525