Crisp Solutions UCommand-525 - Manual (Page 14)

— Operating the UC-525
Chapter 3 Chapter 3
Operating the UC-525
This chapter tells you how to set up the UC-525, automatically con-
figure devices, and use advanced features such as macros.
Before using the Learning Function
Before you start configuring your remote controls using the learning
function, please note the following:
•
You may map multiple devices to the same device layer. This
can be very useful, for example, if you wish to control the
TV’s volume using your amplifier without having to change
between the two device screens. In this case, you learn the
regular TV functions from the TV remote and the volume
functions from the amplifier remote. In rare cases this might
fail, although no corruption of data or other damage will oc-
cur. If this happens, delete the learned code for the device
layer and learn only one remote to the device screen.
•
To reconfigure a device layer for a different device, first
DELETE all the commands for the device. Refer to the chap-
ter ”Using the delete function”.
•
When using the learning function, you must press each but-
ton within 120 seconds. Otherwise, the UC-525 will exit
learning mode and return to normal operation mode.