Maxim Integrated 73S1217F CCID USB Linux Driver - Manual (Page 7)

UG_12xxF_041 73S1215F, 73S1217F CCID USB Linux Driver Installation Guide
Rev. 1.00 7
3.3 Required Package Build Order
1.
The following order of package builds must be adhered to for proper operation of the resultant user space
device driver.
2. ccid-1.2.1
pcsc-lite-1.4.0
3.
4.
pcsc-perl-1.4.6
pcsc-tools-1.4.8
Installation will eventually result in creation of:
/usr/local/pcsc/drivers
3.4 Building the Packages
The following packages are optional:
libmusclecard-1.3.3
HandlerTest-0.3.1
3.4.1 pcsc-lite
The building order, additional post-build installation commands and startup order, are critical to proper
operation. Please maintain the order shown below and enter the commands in the sequence they are
presented.
Enter the following commands:
cd pcsc-lite-1.4.0
/configure
make
make install
3.4.2 ccid-1.2.1
This installs /usr/local/sbin/pcscd, the CCID daemon.
Run the following commands:
cd /usr/local/src/CCID/ccid-1.2.1
./configure
make
Now you must edit a file in the ./readers directory, to define the Teridian device:
ls -al readers/supported_readers.txt
The output should look as follows:
root@slack:/usr/local/src/CCID/ccid-1.2.1# ls -al
readers/supported_readers.txt
-rw-r--r-- 1 1000 1000 2527 2007-01-04 12:26 readers/supported_readers.txt
root@slack:/usr/local/src/CCID/ccid-1.2.1#
Edit this file and add the following text at the end (about line 107):