Maxim Integrated 73S1210F Multi-SAM Evaluation Board Lite - Manual (Page 2)

73S1210F Multi-SAM Evaluation Board Lite Quick Start Guide QS_1210F_051
2 Rev. 1.0
Demonstration Host Application
Included on the CD is a demonstration application named “TSCP-CCID.exe” which is located in the
“x:\yyy\ \PCCID Vz.zz Release\Host Applications\Windows App\App\Bin\Release” directory (where x
refers to the drive, yyy refers to the directory the installation .zip file was expanded to and z.zz is the
latest version of the firmware release). This is a host application that allows:
• Smart card activation and deactivation, in ISO or EMV mode.
• Smart card APDU commands to be exchanged with the smart card inserted in the board.
• Starting a test sequence in order to test and evaluate the board performance against an EMV test
environment.
Run TSCP-CCID.exe to execute the host demonstration application. At this point the application window
should appear. For additional information regarding the use of the Teridian Host application, refer to the
Pseudo-CCID Host GUI Users Guide (UG_12xxF_037).
The CD provided with this evaluation board includes the ANSI C source code of the Teridian generic
driver that will allow seamless integration into virtually any processor and operating system. For
additional information, refer to the 73S12xxF Pseudo-CCID Host Application Guide (UG_12xxF_052).
© 2009 Teridian Semiconductor Corporation. All rights reserved.
Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.
Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective owners.