Maxim Integrated 71M6531 Demo Board - Manual (Page 2)

71M6531 Quick Start Guide
v1.3 © Copyright 2004-2007 TERIDIAN Semiconductor Corporation 2 of 3
Demo Board Test Setup
The file DBUM6531_v1-2.pdf is the User Manual for the Demo Board. It contains detailed instructions on how to set
up and use the Demo Board. This document should be carefully read and understood before attempting to use
the Demo Board.
The figure below shows the basic connections of the Demo Board plus Debug Board with the external equipment.
Spacer
removed
5VDC Power
Debug
Board
Demo
Board
5VDC Power
Host PC
Using the Demo Board
The Demo Board is a ready-to-run meter with a Kh of 1.0 Wh/pulse. The Demo Board has been tested on a meter
calibration system, but it has not been calibrated. Please refer to the Demo Board User’s Manual for further details
and on how to reconfigure the Demo Board for shunt or CT configuration.
Before using the in-circuit emulator, the latest WEMU51 application program should be downloaded from the Signum
website (
www.signum.com ) and installed. It is important to create a new project with the 71M6534 IC selected as
the target in the project dialog. Using the ICE software with 6521 or 651X project settings will lead to unpre-
dictable results.
Documentation
All data sheets, user’s manuals and user’s guides are in electronic form, i.e. on the CD-ROM supplied with this kit.
The TERIDIAN Semiconductor web site should be checked frequently for updates.
Software/Utilities
Demo code, source files, and libraries can be found in electronic form on the supplied CD-ROM. The CD-ROM also
contains all tools and utilities described in the documentation.
Support
Support is available from:
TERIDIAN Semiconductor Corporation
6440 Oak Canyon Rd., Suite 100, Irvine, CA 92618-5201
Phone: (714) 508-8800 ▪ Fax: (714) 508-8878
http://www.teridian.com/
[email protected]
TERIDIAN Semiconductor Corporation makes no warranty for the use of its products, other than expressly contained in the
Company’s warranty detailed in the TERIDIAN Semiconductor Corporation standard Terms and Conditions. The company
assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications
detailed herein at any time without notice and does not make any commitment to update the information contained herein.