Maxim Integrated MAX6876 Power-Supply Tracker/Sequencer - Manual (Page 3)

>Connect from the menu, and choose OK.
5. To enable a channel, click the checkbox in the upper left corner of each channel window; next, set the
undervoltage and overvoltage thresholds by either clicking the voltage to the right of the window or
dragging the waveform.
Figure 3. This screen capture illustrates how to enable a channel and set the thresholds of the MAX6876
with the Evaluation Kit software.
6. Select the sequence for each channel by dragging the base of each ramp. Reverse sequencing can be
turned-on using the Power Down Mode option buttons.
Page 3 of 6