Malone MPG460G 2010 - Manual (Page 8)

MPG460G 01-2010
800-295-0042 ext 206 [email protected] 8
9. Clamp the frame rails around the
tongue as shown using two 1/2” x
3-1/4” bolts. Use a washer on both
sides. Hand tighten only.
10. Lay the two frame cross mem-
bers in between the frame rails. The
two holes in the middle should face
DOWN as shown. Bolt the frame
rails to the cross members using 3/8”
x 1” carriage bolts and nuts, (no washers). The square carriage
heads go to the outside with the square holes in the frame rails.
Hand tighten only.