Malone MPG460G 2010 - Manual (Page 15)

800-295-0042 ext 206 [email protected] 15
01-2010 MPG460G
4. Check the coil of wiring harness outside the tongue grommet.
5. Route the GREEN/BROWN
wire along the RIGHT side of
the frame.
Route the YELLOW/BROWN
wire along the LEFT as shown.
6. Use the clips provided to secure the wire to
the inside of the frame channel as shown
7. Route the wires thru the mid cross member as shown then secure the harness in place using
the frame clips provided. Use your knife to CAREFULLY divide 1/2” of the green/brown wire and
the yellow brown wire
just below the side
lamp as shown.
8. Then grasp either side of the cut with your finger-
nails and pull to separate 3” of wire as shown.