Malone MPG460G 2010 - Manual (Page 11)

800-295-0042 ext 206 [email protected] 11
01-2010 MPG460G
3. Lay the springs on top of the axle
with the centering studs in the holes
in the axle. Then assemble the
U-bolts, tie plates and nuts as shown.
Make sure both springs are
turned with the ends facing the
same way!!!
SPRING AND AXLE ASSEMBLY
(Group 2)
2. Spin the axle to find the side with the spring
centering holes. These holes mate with the
spring center stud as shown to the left.
1. Set the envelope containing the manufacturer’s
certificate of origin (MCO) and VIN labels aside in a
safe place.