Make Noise Erbe Verb - Manual (Page 6)

Erbe-Verb Panel Controls (cont’d)
10a. DECAY Panel Control: uni-polar control for Decay. 0 - 120% reflection gain. Infinity at Full CW.
10b. DECAY CV Attenuator: bi-polar attenuator for Decay CV IN.
10c. DECAY CV IN: control signal input for Decay. Range +/- 5V.
11a. REVERSE LED: visual indication of Reverse. Lights when Reverse is engaged, flickers to
indicate Reverse buffer rate.
11b. REVERSE Gate IN: will Reverse on Gate HIGH. Momentary action. 1.5V trigger signal to operate.
11c. REVERSE Button: toggles Reverse on/ off. In Reverse Pre-Delay (7a, 7b) determines Reverse buffer
size. Using internal clock: 42ms - 500ms; using external clock: 0.1ms - 5.46s synchronized.
12. TEMPO IN: allows synchronization of Echoes to multiple or division of an external Clock.
While following external Tempo the Speed (5a, 5b, 5c) and Pre-Delay (7a, 7b) will be multiple
or division of the incoming clock. Requires Clock/ Gate signal amplitude of at least 1.5V and
width of at least 6ms.
13a. CV OUT LED: visual indication of the CV OUT signal.
13b. CV OUT: control signal representing the average energy of the algorithm. Range 0V - 10V
11a
10a
10b
11b
11c
12
13b
13a
10c