Longshine LCS-WA3-50 - Manual (Page 16)

Wireless 11n Access Point
15
Wireless
3.2.1 Basic Settings
This page is used to configure the parameters for wireless LAN clients which may connect to your
Access Point. Here you may change wireless encryption settings as well as wireless network
parameters. You can set up the configuration of your Wireless basic settings and monitor the
Wireless Clients associate with your router.
Items Information
Disable Wireless LAN
Interface
Mark the checkbox to disable interface of Wireless LAN
Band
To select a band for this device to match 802.11b, 802.11g,
802.11n, 802.11b/g, 802.11g/n or 802.11b/g/n. optional parameters:
2.4GHz(B),2.4GHz(G),2.4GHz(N),2.4GHz(B+G),2.4GHz(G+N),
2.4GHz(B+G+N)
Mode
Configure this device as AP, Client, WDS or AP+WDS ，
AP+MESH,MESH. If you set this device as AP or AP+WDS mode,
the button is available for you to set up four SSID for
this wireless network. Click on this button to do more
configurations.