Longshine LCS-IR2114-D - Manual (Page 32)

IP Sharing Router
- 32 -
3.3 LAN
Choose menu “LAN”, you can see the submenus under the main menu: LAN Settings and DHCP Client
List. Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
3.3.1 LAN Settings
Settings
Enter the IP Address for the LAN of the Router, the formal is in dotted-decimal
notation(the factory default value is 192.168.1.1)
IP Address
Enter the subnet mask for the LAN of the Router, this address code determines
the size of the network. Normally use 255.255.255.0 as the subnet mask.
Subnet Mask
Enable or disable the DHCP server. If you disable the server, you must have
another DHCP server within your network or else you must manually configure
the computer.
The Gateway acts as
DHCP Server
This field specifies the first address in the IP address pool. IP Pool Starting Address
This field specifies the end address in the IP address pool. IP Pool Ending Address
This is the amount of time in which a network user will be allowed connection
to the router with their current dynamic IP address. Please select the amount of
time.
Lease Time
Select it or not to configure this parameter. DNS Proxy
Note:
If you change the IP address of the LAN, you must use the new IP address to login to the router.