Longshine LCS-IR2114-D - Manual (Page 23)

IP Sharing Router
- 23 -
3.2 WAN
The Router provides six connection types for WAN to connect to the Internet, they are “Dynamic IP
Address”, “Static IP”, “PPPoE”, “PPTP”, “L2TP”, and “BigPond”. For configuring the WAN, you should
select the connection type firstly according your needs.
1. Dynamic IP Address
If you aren’t given any login parameters and IP information, please select Dynamic IP, then the router will
automatically get IP parameters from your ISP. Click the OK button to save the IP parameters.
Dynamic IP Address
Enter the IP address of the request. Request IP Address
The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But
this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
MTU
Select it or not to configure this parameter. Static DNS Server
Primary DNS & If your ISP gives you one or two DNS address, enter the primary and