Longshine LCS-FSP8108-4 - Manual (Page 6)

Power Receptacle
To be compatible with the electric service
standards around the world, the switch is
designed to afford the power supply in the
range from100 to 240VAC, 50/60Hz. Please
make sure that your outlet standard to be
within this range.
To power on the switch, please plug the
female end of the power cord firmly into
the receptacle of the switch and the other
end into an electric service outlet. After the
power cord installation, please check if the
power LED is lit for a normal power status.
Installation
This switch can be placed on your desktop
directly, or mounted in a rack. The
installation is a snap. Users can use all the
features of the switch with simply attaching
the cables and turning the power on.
Before installing the switch, we strongly
recommend:
1. The switch is placed with appropriate
ventilation environment. a minimum
25mm space around the unit is
recommended.
2. The switch and the relevant components
are away from sources of electrical
noise such as radios, transmitters and
broadband amplifiers
3. The switch is away from environments
moisture
5
beyond recommend