Longshine LCS-FSP8108-4 - Manual (Page 3)

data transmitting cable and power cord, it
eliminates the effort constructing your
network. You could easily connect a
Wireless AP or a VoIP phone to this switch
without looking outlets for them. Over
current protection and circuit shorting
protection are also supported to ensure the
safety.
The switch is plug-n-play without any
software to configure and also fully
compliant with all kinds of network
protocols. Moreover, the rich diagnostic
LEDs on the front-panel provide the
operating status of individual port and
whole system.
Key Features
Complies with 10BASE-T specifications
of the IEEE802.3 standard
Complies with 100BASE-TX
specifications of the IEEE802.3u
standard
Compliant with IEEE 802.3af PoE
standard (DTE power via MDI-X)
Provides 4 PoE ports with classification
identify
Supports 15.4W maximum per PoE port
Supports over current protection and
circuit shorting protection
8 * RJ-45 ports for 100BASE-TX and
10BASE-T connectivity
2
Supports NWay protocol for speed