Connections – Longshine LCS-883C-TB User Manual
Page 12
![background image](/manuals/698250/12/background.png)
10Base-T to 10Base-2 Converter
Connections
10Base-T Connection
1.
Make sure that the length for straight through twisted pair
cable between 10Base-T device (hub or switch) and
converter is no greater than 100 meters.
2.
Connect one end of twisted pair cable to RJ-45 jack on the
converter and the other to the RJ-45 jack on the 10Base-T
device.
10Base-2 Connection
To connect to an Ethernet using 10Base2 cable, do the following:
1.
Attach the supplied BNC T-connector to the converter’s
BNC connector.
2.
Connect one end of a Thinnet (10Base2) coaxial cable to the
BNC T-connector attached to the media converter.
3.
Connect the other end of the coaxial cable to the BNC T-
connector attached to the Ethernet device.
Note: If either your converter or the Ethernet device is an end
node, attach a BNC terminator to the open connector on the
BNC T-connector.
- COBRA15 (76 pages)
- GFT150 Ver.1.0 (55 pages)
- GFT150 Ver.2.0 (66 pages)
- GT150 (82 pages)
- D945GSEJT (72 pages)
- G41D3+ (47 pages)
- D410PT (62 pages)
- LCS-6019 (6 pages)
- LCS-6020 (3 pages)
- LCS-6021 (6 pages)
- LCS-6022 (4 pages)
- LCS-6024-A (5 pages)
- LCS-6080 (4 pages)
- LCS-6320 (9 pages)
- LCS-6321O (6 pages)
- LCS-6322M (6 pages)
- LCS-6380 (5 pages)
- LCS-8031N1 (60 pages)
- LCS-8037TXR3 (7 pages)
- LCS-8038TXR7 (61 pages)
- LCS-8051A (33 pages)
- LCS-8056C2 (162 pages)
- LCS-8131N2 (127 pages)
- LCS-8131N3 (347 pages)
- LCS-8156C1 (194 pages)
- LCS-8337TXR (11 pages)
- LCS-8539TXR1 (5 pages)
- LCS-8560C1 (220 pages)
- LCS-883C-IND (24 pages)
- LCS-C819 (29 pages)
- LCS-C841MC (34 pages)
- LCS-C842MC (18 pages)
- LCS-C842SC (17 pages)
- LCS-C844 (56 pages)
- LCS-C844MC (56 pages)
- LCS-C862 (13 pages)
- LCS-FS6105-B (40 pages)
- LCS-FS6116-C (7 pages)
- LCS-FS8116-B (35 pages)
- LCS-FS8124-B (35 pages)
- LCS-FSP8108-4 (9 pages)
- LCS-GS7104+1 (8 pages)
- LCS-GS7105-B (34 pages)
- LCS-GS7108-C (36 pages)