Liberty Garden 840 - Manual (Page 5)

5
11. Attach the Leader Hose (E) to the end of
swivel. DO NOT OVER TIGHTEN.
See Figure 11
10. Slide U-Handle (D) over the frame
extensions and align the holes. Insert 1.44”
Bolts (N) thru handle holes and attach with
wing nuts. See Figure 10
12. Attaching Your Garden Hose:
The 840 is designed to hold up to 250’ of
5/8” garden hose. Attach your hose to the
brass adapter (on the galvanized tee).
Loop the hose over the spool end (as shown)
to avoid kinking. See Figure 12
FILLING THE TIRES WITH AIR:
The recommended pressure for the tires
is 15 PSI.
WARNING! DO NOT OVERINFLATE!
Over inflation could cause the tires to
explode. A hand pump (bicycle pump)
is highly recommended when inflating the
tires. If a compressor is used, use with
extreme caution! These tires are small
and pressure can build quickly.
FIGURE 12
Your Model 840 hose cart is now ready
to use. Attach the end of the leader hose
to your water supply.
FIGURE 10
FIGURE 11
N
N
D
E