Liberty Garden 840 User Manual
Page 3
FIGURE 2
FIGURE 3
FIGURE 1
1. Turn Frame
(B) on it’s back. Insert Axle Rod (F) thru the
axle bushing on the frame. Repeat.
See Figure 1
2. Place the tires
(C) over the axle with the air valve facing
out. Place the axle washer
(O) over the thread and screw on
the axle nut
(P) and tighten securely. Repeat for each
remaining tire.
See Figures 2 & 3
4. Insert the Brass Swivel
(K) through the U-bushing
(G) and screw the end of the swivel into the
galvanized tee
(L). See Figure 4. Using a wrench,
tighten the swivel into the galvanized tee. Tighten
securely but do not over tighten. Over tightening
the swivel could cause leakage.
3. Set the cart upright on the tires.
5. Screw the galvanized tee
(L) onto the spool end
(A) Tighten with wrench. See Figure 5
3
FIGURE 5
F
B
G
K
L
F
FIGURE 4
FIGURE 3