Lippert Components Tent Camper Bike Rack - Manual (Page 6)

6
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Place the open side of the Crossbar over
the top ends of the Uprights and align the
top holes on the Uprights with the slots on
the Crossbar. (Fig. 13)
Insert Carriage Bolts from the rear of the
Crossbar forward on both Uprights. (Fig. 14)
Carriage Bolt should protrude through the
front slot of the Crossbar. (Fig. 15)
Thread the Flange Nut onto the Carriage
Bolt. Center bolt as close to center of
the slot as possible on both Uprights and
snug down firmly. (Fig. 16)