Lippert Components Tent Camper Bike Rack - Manual (Page 5)

5
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Insert the Upright Inner Tube into
the Upright Bases. (Fig. 9)
Set the preliminary height by pinning
the Uprights in the desired location.
(Fig. 10)
Be sure to insert the Upright Locking Pin
completely through holes in both the
Inner and Base components of the
Uprights. (Fig. 11)
Engage Safety Clip when Upright Pin is set.
(Fig. 12)