Lippert Components Level Up User Manual

Page 4

Rev: 12.15.2014

Page 4

Level Up Towable Owner's Manual

Fig. 2

Prior to Operation

The leveling system shall only be operated under the following conditions:
1. The unit is parked on a reasonably level surface.
2. Be sure all persons, pets and property are clear of the unit while LCI Level-Up® Automatic System is in

operation.

3. Ensure the battery of the unit is fully charged or that the unit is plugged into shore power prior to

attempting to operate the system. Level-Up® requires a minimum of 12 VDC from the battery for

proper operation.

Operation
Basic Jack Operation

1. Landing gear Jacks
Landing gear jacks can be operated any time the system is “ON” but NOT in the “AUTO MODE.” By pushing

the “FRONT” button (Fig. 1G), both front or landing gear jacks can be extended. If the touch pad is put in the

“RETRACT” mode, indicated by the orange illuminated LED next to the “RETRACT” button (Fig. 1D), the front

jacks can be retracted together by pushing the “FRONT” button.
2. Level-Up® jacks
The Level-Up® jacks operate when the “AUTO MODE” is activated or the touch pad is in the “MANUAL

MODE.” Once system is in “MANUAL MODE,” pressing the “REAR” button (Fig. 1J) will extend all Level-Up®

jacks at the same time. Press the “LEFT” or “RIGHT” buttons (Fig. 1H and 1I) to operate Level-Up® jacks on

the left or right side of the unit, respectively.

5th Wheel Operation
Unhitching Instructions

1. Push touch panel “ON/OFF,” (Fig. 1K) to turn system on. LCD Screen (Fig. 1E) lights up.
2. LCD will display status … “NOT LEVEL JACKS: UP" (Fig. 2A).

NOTE: Orange arrow lights (Fig. 2B) may come on, indicating the current disposition of the unit.
3. Push "FRONT" button (Fig. 1G) to extend landing gear jacks and lift front of unit to take the weight of

the 5th wheel off of the hitch.

4. Uncouple the 5th wheel connection on the tow vehicle.
5. Pull tow vehicle away and park at a safe distance.