Levana Jena V2 Manual - Manual (Page 12)

12
Turn the MONITOR ON/OFF
• Press and hold the POWER
button on the side of the monitor to turn the monitor ON.
• Press and hold the POWER button again to turn OFF the monitor.
Pairing the Camera(s) and Monitor
The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the
devices do not automatically connect and transmit, you may do so manually. To pair additional cameras, follow the steps
below and be sure to assign a different camera number to each additional camera.
1. To pair your camera and monitor, press and hold the button on the monitor. Use the VOLUME arrows (side) to
select a camera number.
2. Press the / button ONCE. The PAIRING LED flashes red quickly (on monitor).
3. Quickly press and hold the PAIRING button on the BACK of the camera. A checkmark will appear next to the
paired camera confirming pairing is successful. Video/audio will be transmitted automatically.
OPERATION
Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side.
Press
Press and hold
Flashing
Press and hold
Select a channel