Levana Sophia - Manual (Page 8)

8
SETUP
Battery Installation - Camera (optional)
The camera unit can be powered using 4 AAA batteries (not
included) instead of the included adapter.
1. Gently remove the Battery Compartment Cover on the
bottom of the camera base, using a small phillips (cross)
head screwdriver.
2. Insert 4 AAA batteries in the compartment (not included),
paying close attention to the labelled polarity markings.
3. Replace the battery compartment cover using the
small screwdriver.
4. The Power LED will flash when the battery charge is low.
Connecting Power to the Monitor / Charging Battery
1. Connect the Power Adapter marked Monitor
to the Power Input on the side of the Monitor.
2. Press and hold the Power button on the
front of the monitor to turn the monitor ON.
3. The icon in the top right corner of the main
screen will show you the battery power status.
EMPTY FULL
Connecting Power to the Camera
1. Connect the Power Adapter marked
Camera to the Power Input on the back of
the Camera.
2. Slide the ON/OFF switch on the side of the
camera to the ON position. Power LED will
be a solid red.
Battery
Compartment
cover