Canon 800II - Manual (Page 38)

Chapter 3 Using the Scanner
38
Scan Batch to File
This mode allows you to specify the file name for the saved image before scanning the
image and saving the scanned image to the specified file.
1
Project the image on the scanner screen.
2
Select [File]-[Scan batch to file...] or click on the Toolbar.
The “ Save Page As...” dialog box appears.
3
Specify the file name, type (format) and save destination, and
then click [Save].
The “Start Scan” dialog box appears.
Number of file name characters
The maximum number of file name characters to be saved is 59 ex-
cept for the extension. If the number of file name characters has ex-
ceeded 59, an error message will appear.
File types
You can save the scanned file in the format of TIFF(*.tif).
BMP(*.bmp).JPEG(*.jpg).JBIG(*.jbg). However, the type of the file to
be displayed differs according to the “Image Selection” of scanner set-
ting. (See Page 37).
NOTE