Canon 800II - Manual (Page 23)

23
Chapter 2 Specifying the Scanner Settings
2
Specifying the Scanner Settings
Detail Settings
The scanning settings can be specified in more detail.
Use this dialog box to specify the detailed scanning settings.
Polarity
Selects the film polarity.
[Nega Film]
Reverses black and white in a negative film image and prints a positive image.
[Posi Film]
Prints positive film as a positive image.
[Auto]
Automatically detects whether the film is negative or positive and prints a positive
image.
Batch type
This mode can be used to select consecutive scanning when the FS Controller III
is used. Refer to the FS Controller III Instructions for details.
[Page]
Specifies consecutive scanning one page at a time.
[File]
Specifies consecutive scanning one file at a time.
[Batch]
Specifies consecutive scanning one batch at a time.