Slide number 6, Solar marine lite, 1 nm – Lake Lite LL-SML-X User Manual
Page 6: Model: ll-sml-x, Steady mode, Flashing mode, Installing the battery

Lake Lite Inc.
2301 Fairfield Ave, Suite 107
Fort Wayne, IN 46807
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
www.lakelite.com
www.solarmarinelites.com
Solar Marine Lite
MODEL: LL-SML-X
STEADY MODE
Fully encapsulated solar panel creates lens effect 
for increased efficiencies in off peak charging hours 
Automatic night 
activation 
Internal user changeable 
flash/steady option 
UV stabilized 
polycarbonate 
6 High Intensity 
LEDs 
Internal user-replaceable 
Battery in sealed compartment 
360 Deg Internal 
Lenticular lens 
External Fresnel 
Lens design 
Easy Mount 
Base unit 
Completely 
sealed 
IP 68 construction 
FLASHING MODE
1. Remove Battery Cover from bottom of unit.
2. Connect both sides of battery connector together
3. Push button to determine light mode steady or
flash: NOTE: light must be in a dark room or
darkness to activate.
4. Install or check that the silicone O-Ring seal is in
place and correctly in position
5. Attach and tighten the battery cover with the
provided 6-screws. Be sure to work your way
around to each screw to fully tighten.
INSTALLING THE BATTERY
1 nm
OIL BOOM LIGHT KIT
