LABEC AA-12S User Manual

Page 8

SEA Series Steam Sterilizers

Operation manual

Prepare the machine before use

We have installed the

in the chamber(Fig3-3).

draining filter

You should clean the

when use the autoclave

draining filter

for a long time.The instruction shows you how to clean it.
Please refer to P17.

Before using the device, you should make electrical
connections by using the power cord that comes with
the unit. Insert the hollowed end of the power cord in
to inlet of the machine and plug the other end on a
power outlet. Caution: The power supply can afford
1800VA load. Ok, you can turn on the autocalve now.

Caution: The power supply must afford at least 1800VA load.

Fig 3-4

Fig 3-3

Tips: Before using the Autoclave, please check on the local atmospheric
pressure. If the pressure is lower than 0.095 Mpa or the Altitude is higher
than 500 meters, you will need to contact your distributor who should
reconfigure the controller in the device.

This manual is related to the following products:

AA-8S