LABEC AA-12S - Manual (Page 6)

SEA Series Steam Sterilizers
Operation manual 2
2.Specifications
Chamber inner dimensions: (Diameter x Depth)-----------------------------------200Mm x 358mm
Power Supply:--------------------------------------------------------------------- According to the nameplate
Sterilizing Temperature/Pressure --121 /(1.0-1.3) Bar (Under standard atmospheric pressure)
--------------------------------------- 134 /(2.0-2.4) Bar(Under standard Atmospheric pressure)
Note: Temperature/Pressure here means the chamber temperature and pressure during the phase
of sterilization. The value varies under different atmospheric pressure.
Power Fuse -----------------------------------------------------------------------------------------------T12A
Water reservoir capacity-------------------------------------------------------------------------- 3.5 liters
Environment temperature -------------------------------------------------------------------- +5 +40
Relative Humidity Range -------------------------------------------------------------------------- 30% 75%
Figures
Package Key
Start/Stop key
Select Key
Dry Key
Test Cycle Key
Used Water Outlet
Cycle Step Key
Caution & Warning
Type B Device
Grounding
Tip:
Standard atmospheric pressure: It is the atmospheric pressure at sea level. It refers to 1
Standard atmospheric pressure. The value is 0.1Mpa=1000Hpa=1.0 Bar. Atmospheric pressure
decreases by higher altitude. For instance: at 3000 meters or lower, An increase of altitude of
1000 meters will result in a decrease of ATM PR .by 0.1Bar approximately.