LAARS NeoTherm NTV600 - Install and Operating Manual - Manual (Page 11)

NeoTherm Boilers and Water Heaters
Page 9
Figure 8. Contents of Shipping Package.
1.4 Warranty
LAARS Heating Systems’ NeoTherm appliances
are covered by a limited warranty. The owner should
complete the warranty registration at www.Laars.com.
All warranty claims must be made to an authorized
LAARS Heating Systems representative. Claims must
include the serial number and model (this information
can be found on the rating plate), installation date, and
name of the installer. Shipping costs are not included in
the warranty coverage.
Some accessory items may be shipped in separate
packages. Verify receipt of all packages listed on the
packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of any
shortages or damage. Any such claims should be filed
with the carrier. The carrier, not the shipper, is
responsible for shortages and damage to the
shipment whether visible or concealed.
1.5 Unpacking
The NeoTherm is shipped in a single crate with the
following standard components packed with the
appliance (
see Figure 8 ):
A. exhaust vent terminal (US only)
B. air intake terminal
C. temperature/pressure gauge kit
D. circulator pump/wire harness
(units with pump)
E. CPVC exhaust pipe section (80-500) (US only)
F. outdoor/system sensor kit
G. flow switch kit
(399-850)
H. alternate size vent/terminal screens
J. exhaust vent adapter CPVC/ST ST
(750-850)
K. 4x6 PVC adapter with 4x7 PVC pipe section
(750-850) (not to be used on exhaust in Canada)
1. Remove all packing and tie-down materials.
2. Check contents of the carton against items shown.
1.6 Dimensions
Dimensions are shown in Figure 9 .