Kurgo Door Guard - Manual

Installation & care
9.14 For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
Washing instructions:
• Brush off loose dirt with a dry brush.
• Wash with cold water, if necessary machine wash in front loading unit with mild soap.
• Hang to dry.
Become a fan of Kurgo on Facebook so you can receive all
the latest updates, giveaways and contest information.
™
Installation:
1) Open car door and stand facing the window from the inside. Hold the
Car Door Guard™ so insert tabs (A) are facing downward and mesh
pockets are facing you. With window up, slide tabs (A) between window
and the window seal. Door guard should hang snuggly in place.
Note: For some cars you may find it easier to insert the Door Guard
with the window down.
2) The Car Door Guard can be adjusted for smaller doors. If the guard
is too wide for your door, fold panel (B) over and apply pressure along the
length to secure to panel (C).
3) Figure 3 illustrates the folded door guard adjusted for door size.
When using with the window down:
It is recommended that the door guard be weighted down when in use
on a door with the window down. Placing items in the cargo pocket of
the door guard will provide enough weight to prevent it from flying
out the window.
NOTICE: Please contact Kurgo directly with any product
or return inquiries.
Thank you for your recent purchase of the Car Door Guard. If you have any
questions or conerns please contact us directly before you contact the
retailer; we are great problem solvers. We hope that you will be happy with
1
2
3