Kurgo Shorty Bench Seat Cover - Manual

NOTICE:
Please contact Kurgo directly with any product or return inquiries. If you have any questions or conerns please contact
us directly before you contact the retailer; we are great problem solvers. We hope that you will be happy with your
purchase and will think of Kurgo next time you travel with your dog.
INSTALLATION INSTRUCTIONS
Kurgo Products • 2D Fanaras Drive, Salisbury, MA 01952 • 877-847-3868 • kurgo.com • [email protected]
10/13 ~ English
See the complete line of
dog travel products at kurgo.com
Become a fan of Kurgo on
Facebook and receive all the latest
updates, giveaways and contests.
1) Insert Plastic Tubing (A)
near seat belt closures, push
into center seat division.
Remove tube straps if not
applicable.
2) For vehicles with access
to the back of the seat, wrap
Securing Straps (B) around
the sides of the seat and
connect in the back. Adjust
for snug fit.
3) Tuck bungee Cord (C)
under the edge of the seat.
See Figure 1 and adjust to
tighten either end of Cord
Lock (E). The under-seat
bungee cord simply slips
through Triangle (D) and locks
to the left and right cord locks.
4) Use the Storage Pocket
(F) for anything you like! We
suggest lots of fun dog stuff!
WASHING INSTRUCTIONS:
1. Brush off loose dirt/hair with a dry brush.
2. Wash with cold water, if necessary machine wash in front loading unit with mild detergent.
3. Always hang to dry.
Underside details are
shown as dashed lines
Figure 1
Push top of
Cord Lock (E)
down and pull
Cord (C) to
tighten.