KERN & SOHN MAP 130K1 - Manual (Page 11)

MAP-BA-e-1212 11
6 Removing packaging and initial start-up
Place of
application
The unit is designed to achieve reliable measuring results un-
der normal conditions of use.
Required conditions for place of operation:
Prevent extreme heat and temperature fluctuations
Protect the appliance against high humidity, vapours and
dust;
Do not expose the device to extreme dampness for longer
periods of time. Non-permitted condensation (condensa-
tion of air humidity on the appliance) may occur if a cold
appliance is taken to a considerably warmer environment.
If present, acclimatise device.
Avoid static charge
Avoid contact with water.
If electro-magnetic fields or static charge occur, or if the power
supply is unstable major deviations on the display (incorrect
weighing results) are possible. In that case, the location must
be changed.
Scope of supply
Device, see chapter. 3
Carrier case
3 Spring sets
Operating instructions
Battery