KERN & SOHN MPD 250K100M - Manual (Page 12)

12 MPD_M-BA-e-1312
6.2 Electromagnetic interferences
Guidelines and
manufacturer’s declaration – electromagnetic interferences
The personal scale MPD-M is designed for use in an electromagnetic environment that meets the
requirements stated below. The customer or user of the medical electrical device must ensure that
operation takes place in such an environment.
Emitted interference
measurements Conformity Electromagnetic environment -
guideline
HF emissions
as per CISPR 11 / EN 55011 Group 1 The personal scale MPD-M uses HF
energy merely for its internal working.
Its HF emission therefore is very low
and it is highly unlike to interfere with
adjacent electronic devices.
HF emissions
as per CISPR 11 / EN 55011 Class B The personal scale MPD-M is
designed for use in all equipment
including those in living areas and
those connected directly to the public
power grid that also supplies buildings
used for living purposes.
Emission of harmonics
as per IEC 61000-3-2 Class A
Emission of voltage fluctuations /
flicker
as per IEC 61000-3-3 Conforms with
Do not put the personal scale MPD-M directly next to other devices and do not stack
it with other devices. If this type of operation is necessary, observe the personal
scale MPD-M to ensure normal operation in such an arrangement.