KERN & SOHN MPE 250K100HM - Manual (Page 54)

KERN MPE

Press , and one after the other and [P1 SPd]
will appear
KERN MPC
Press , and one after the other and [P1 SPd] will
appear


Press , „P2 CAL“ will be displayed

Operate adjustment switch; for position see chap.16

Press (MPE) or (MPC) and [dESC] will appear

Press repeatedly until „CAL“ will be displayed.

To confirm, press (MPE) or (MPC) and [UnloAd]
will appear

Ensure that there are no objects on the weighing pan.

Wait until the stability display „STABLE“ is displayed and then
confirm by pressing (MPE) or (MPC).
(example)

The size of the currently set adjustment weight will be
displayed.
To change, select the digit to be altered by , and the
numerical value by .

Confirm by pressing (MPE) or (MPC) and [LoAd]
will be displayed.
54 MPC_M / MPE_HM / MPE_PM-BA-e-1414