KERN & SOHN HDB 10K10N - Manual (Page 21)

HDB-N-BA-e-1320 21
5.7.3 Peak value function
This function displays the highest load value (peak value) of a weighing.
Measuring frequency: 200ms
Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).
 Switch on the balance, keep the HOLD-button pressed until the current setting
„Hx“ (H1 – H6) appears.
 Press ON/OFF button repeatedly until the setting „H6“ is displayed.
 Use the HOLD-button to confirm your selection
 Suspend the material to be weighed
 The peak value appears for a short time, symbolised by the [] top left. The
balance returns automatically to zero and is ready for further measurement.
6. Menu
 When the balance is switched off, press the HOLD-button and keep it pressed
 Do not release the HOLD-button. Press also the ON/OFF/TARE-button and keep
it pressed
 Keep the ON/OFF/TARE-button pressed, however release the HOLD-button
 Press HOLD-button anew

Keep both buttons pressed until in the display “tr” appears
 Release both buttons. The balance is situated in the menu.
 Press the ON/OFF/TARE-
button until „AF“ appears. Confirm the selection of the
Auto Off-function using the HOLD-button
 In the display appears the current setting „ON“ or „OFF“. With help of the
ON/OFF/TARE-button you can select between
„ON“ or „OFF“. Confirm your
selection with the HOLD-button. After a short period the balance returns
automatically to weighing mode.