KERN & SOHN CXP Version 1.6 - Manual (Page 44)

CXB/CXP-BA-e-1016 44
14.2 Description of interface
The selection of a certain operating mode allows you to set the output format, the
output control, the transmission speed and the parity bit.
Navigation in the menu:
ƒ Press key, [CEnTR] appears on the reference weight display.
During this display press the key, on the weight display appears
[FVnCT].
ƒ To select function, press number keys
ƒ To select parameters, press number keys:
= up, = down, = left, = right
ƒ Use the key to store
ƒ To exit the menu, press the key
Function selection Parame-
ter se-
lection
Description of function
Key Weight
display
Display
refer-
ence
weight
Display
number of
pieces
LEn B
-
SERLE
LEn C
-
Not documented
XXX XXXXX - Not documented
XXX XXXXX - Not documented
-
DATE
061210 Setting date
-
TKnnE
151707
hrs/min/s
Setting time
STl XX
XX = see
table 1
- -
For display format, see also example in
chpt. 13.2.1
Confirm setting by pressing the key, then enter the number of output
values (max. 15)