KERN & SOHN CPB 30K5DM - Manual (Page 30)

8 Piece counting
With pieces counting you can either count parts into a container or remove parts
from a container. To count a greater number of parts the average weight per part has
to be determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness. High reference must be selected for
small parts or parts with considerably different sizes.
8.1 Determination of the reference weight by weighing
Operation Display
 Reset balance to zero or tare the empty
weighing container if necessary.
Set reference:
 Place a known number of pieces on the
balance as reference
 Wait for the stability display, than enter the
number of individual items via the numeric
keypad. Confirm within 5 sec:
„SAMP“ is shortly displayed;
The reference weight will be determined
and displayed.

CPB-N / CPB-DM-BA-e-1424 31