KERN & SOHN RFB - Manual (Page 20)

RFB-BA-e-1211 20
 Wait for the appearance of
the triangle over the
stability display
, then
place the adjustment weight
 Confirm with
The adjustment process is
started.
 The display changes to „F0
CAL“
Now the process of adjustment
is completed.
 Remove adjustment weight
from weighing plate

 Using the balance
returns into the weighing
mode
In case of an adjustment error or incorrect adjusting weight the display will show an
error message; repeat adjustment process.
6.9 Verification
General introduction:
According to EU directive 90/384/EEC balances must be officially verified if they are
used as follows (legally controlled area):
a) For commercial transactions if the price of goods is determined by weighing.
b) For the production of medicines in pharmacies as well as for analyses in the
medical and pharmaceutical laboratory.
c) For official purpose.
d) For manufacturing final packages.
In cases of doubt, please contact your local trade in standard.