KERN & SOHN FOB 30K-3NL - Manual (Page 11)

Procedure when adjusting:
Observe stable environmental conditions.
A warming up time (see chapter 1; Technical Data) is required for stabilization.
Ensure that there are no objects on the weighing plate.
Models FOB-NS:
Balance display
Operation

(example)
 Switch off the balance
 Press and hold , press 3x at the same
time, release - an internal value is displayed.

(example)
 Press , "0" is displayed
 Put adjustment weight in the centre of the weighing
plate and press , "CAL" is displayed, followed
by the value of the adjustment weight.
 Take away adjustment weight
 The balance changes into weighing mode.
 Adjustment has now been completed successfully.
FOB-N-BA-e-1410 11