KERN & SOHN FOB 30K-3NL - Manual (Page 18)

7.4 Hold function (only "L" models)
The balance has an integrated standstill function (mean value calculation). With this it
is possible to weigh unstable samples to be weighed exactly. There are 2
possibilities:
1.
Balance display
Operation
 Start balance by pressing .
The balance will carry out a self-test.
 Wait for „0“ display
(example)
 Put sample to be weighed in place and press ;
"HOLD" will appear and a small triangle flashes.
During this time, an average value is recorded.
 The triangle will stop flashing, the stability display
appears and the weight value obtained is displayed.
 By pressing the balance returns to weighing
mode. The triangle disappears.
18 FOB-N-BA-e-1410