Set auto-off function – KERN & SOHN FFN 25K10IPM User Manual
Page 27

27
FFN-N-BA-e-1323
9.3
Set auto-OFF function
Start balance by pressing
While the balance carries out a self test, press
and
keep pressed until „F1 CAL“ appears
Press
repeatedly until „F5 oFF“ appears
Select function using
Use
to change between the individual parameters
Select the desired parameter using
“F5 oFF“ appears, now the function is enabled
Press
repeatedly until “bACK“ appears
Press
The balance carries out a restart and changes to weighing
mode
This manual is related to the following products: