Verykool i705 User Manual

Page 23

Note: If Line 2 is selected, making calls from Line 2 depends on the

network operator

Close user group: Press the left soft key to access Group List, and then

select Add to input the group's name. Press the left soft key to select Done,
and then add the index. Press the left key to finish. Select Option to Edit,
Add, Activate, Deactivate or Delete the existing group.

Note: This service needs the network support
More:
1. Black list: you can set 20 numbers. When this Black list is enabled,

you would not receive the calls from the numbers entered in the Blacklist

2. White list: you can set 20 numbers. When this white list is enabled,

you can but receive the calls from the numbers entered in the white list.

3. Auto Redial: You can set the Auto Redial function On or Off. When set

to ON, the phone will automatically redial the recent outgoing number after
a while if you fail to connect to the number. The times for auto redial are up
to 10 times. You can’t make any other calls when the Auto Redial is
ongoing. Press Cancel to end Auto Redial.

4. Speed Dial: Set the status on, and then you can set 8 groups for the

speed dial. (Corresponding number keys are 2 to 9). In the standby mode,
press and hold the number key to dial the corresponding number

5. Call Time Display: You can set Call Time Display On or Off. The call

time will display when set it on, .The call time won't display when set it off.

6. Call Time Reminder: In order to save some calling cost, this function

prompts you to end the call in time. You can select Off, Single, or Periodic.
There is no prompt when Off is selected. You should enter a specific time
between 1 and 3000 seconds when Single is selected. The phone will ring
once when the time is up. You should enter a specific time between 30 and
60 seconds when Periodic is selected. The phone will ring once
automatically at the specific time before the integral minute is up.

7. Auto quick end: You can set ON/ OFF, and set a time (1~9999) as your

desire.