Verykool i705 User Manual

Page 22

General call settings

Call Waiting:
1. Activate: The mobile phone will connect to the network when Call Wait

is enabled. After a while, the network will respond by sending messages to
ensure your operation. If Call Wait is enabled, the network will alert you. At
the same time, another incoming call number will display on the screen
when the first call is ongoing and a new call is coming thru.

2. Deactivate: If you cancel Call Waiting, the network won't alert you

when the first call is ongoing and a new call is coming thru.

3. Query Status: With this function, you can inquire about the current

status from the network.

Call Divert: This function allows your phone to divert incoming calls to

another phone:

1. Divert All Voice Calls: When this function is enabled, all incoming calls

will be diverted to another phone. Set it On or Off, the phone will connect to
the network. After a while, the network will respond and tell you the result of
an operation.

2. Divert If Unreachable: When this function is enabled, the incoming call

will be diverted to another phone number if the phone is unreachable.

3. Divert If No Answer: When this function is enabled, the incoming call

will be diverted to another phone number if there is no answer in some
time.

4. Divert If Busy: When this function is enabled, the incoming call will be

diverted to another phone number if the phone number you dialed is
busing.

5. Divert All Data Calls: You can divert all data calls with the need of your

network operator's support.

6. Cancel All Divert: Use to cancel all diverting functions.
Call Barring: This function makes use of Call Barring to limit some

selected calls. When you configure this function, you should consult with
your network provider for the password. If the password is incorrect, the
phone will prompt the fault message. After the desired number is selected,
please continue to select On or Off. After a while, the network will respond
and tell you the result.

Line Switching: Switch to Line 1 or Line 2, the default is Line 1.