Verykool i600 - Manual (Page 31)

27
while if you fail to connect to the number. The time for auto redial is up
to 10 times. You cannot make any other calls when the Auto Redial is in
process. Press Cancel to end Auto Redial.
2) Call Time Display
You can set Call Time Display On or Off. The call time will display when
it is activated, .The call time would not display when it is deactivated.
3) Call Time Reminder
In order to save the call cost, this function prompts you to end the call in
time. You can select Off, Single, or Periodic. There is no prompt when
Off is selected. You should enter a specific time between 1 and 3000
seconds when Single is selected. The phone will ring once when the
time is up. You should enter a specific time between 30 and 60 seconds
when Periodic is selected. The phone will ring once automatically at the
specific time before the integral minute is up.
4) Auto Quick End
You can set ON/ OFF, and set a time (1~9999s) as your desire.
Network Settings
Please contact the network operator for the following network service.
1. Network Selection
You can choose Automatic or Manual to select the network (Auto is
recommended). When you select Automatic, the phone will make the
preferential selection according to the network where the SIM card
belongs. When you select Manual, you are required to select the same
network as the registered network with the network operator by SIM
card for your use.
2. Preferences
Select the Preferred Networks. The default network is the network
where the SIM card belongs. Select Options to perform the following
operations:
 Add From List: Display all PLMN list.
 New: Create a new network and set the network priority.
 Change Priority: Reset the selected Network Priority.