Verykool i600 - Manual (Page 21)

17
User profiles
General
1. Activate
2. Customize
 Tone Settings: Includes Incoming Call, Power on, Power off,
Message, Keypad. You can select built-in ring tunes, or the tunes
composed by yourself.
 Volume: Includes the volume setting of Ring Tone and Key Tone.
The volume degree is from 1 to 7.
 Alert Type:
− Ring Only: Just ringing, no vibration.
− Vibrate Only: Just Vibrating, no ringing.
− Vibrate and Ring: Ringing and vibration.
− Vibrate then Ring: Ringing after vibration.
− Silent: No ring or vibration.
 Ring Type:
− Single: Rings once when there is anincoming call.
− Repeat: Rings continuously when there is an incoming call.
− Ascending: Rings continuously and the volume increases
gradually.
 Extra Tone:
− Warning: If necessary, you will be warned by the prompt tone.
− Error: You will be warned by a tone if you make a mistake.
− Camp On: A prompt tone will be heard after searching the
network successfully.
− Connect: A prompt tone will be heard after the call gets
connected.
 Answer Mode:
− Any Key: Press any key to answer a call (Except for Hang Up
Key and Right Soft Key).