Procedure, Inserting the t-flash memory card – Verykool i600 User Manual

Page 11

Text mode
Original mode

Procedure

1. Remove the battery cover by sliding down.
2. Insert the SIM card, with the notch at the bottom right and the gold

contacts face down, into the card slot.

3. Replace the battery and close the cover tightly.
Note:
 If the SIM Card is not installed properly or gets damaged, “Insert

SIM” will display on the screen after you switch on your phone.
Remove the SIM Card and mount it again as shown in the picture

 If you have inserted the SIM correctly but still “Insert SIM” appears

on the screen, please check there is no stain on the surface of the
SIM card. If there are stains on it, please clean them with rubber
carefully and then try again.

 If the screen displays that the SIM card is locked permanently,

please consult with your network operator.

Inserting the T-Flash Memory Card

Please follow the steps as described below: