Using the alarm, Using the light, Auto light – Casio DQD-105 User Manual
Page 3: To turn auto light on and off, Operation guide dqd-105
Operation Guide DQD-105
3
USING THE ALARM
The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the
Alarm
Mode selector
(
7
) to select the snooze alarm feature.
Setting the Alarm Time
Use the
Alarm Time Set buttons
(
4
) to set the alarm time.
Pressing the
Alarm Time Set buttons
(
4
) causes the alarm time to appear in place of the time on the display.
Press to change the
alarm time setting (—).
Press to change the
alarm time setting (+).
•
Holding down
+
or
–
changes the digits at high speed.
Turning the Alarm On and Off
Use the
Alarm Mode selector
(
7
) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.
Alarm Mode selector
SNOOZE
(
)
ALM ON
(
)
ALM OFF
Description
The alarm sounds at the preset time for one minute, and seven
more times every five minutes thereafter. Even if you stop the
alarm sound by pressing the
SNOOZE/LIGHT button
(
1
), the
alarm operation is performed again five minutes later.
•
The indicator
flashes on the display to indicate that the
snooze feature is activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
TO TURN AUTO LIGHT ON AND OFF
1. While the Normal Timekeeping Screen is displayed, press the
AUTO LIGHT button
(
3
).
2. Within about five seconds, press the
Alarm Time Set buttons
(
4
) to toggle Auto Light on or off.
3. After the setting is the way you want, simply do not perform any key operation for about five seconds. The clock
will return to the Normal Timekeeping Screen automatically.
* A NIGHT LIGHT indicator (
) remains on the clock display while Auto Light is on.
4
3
•
The light also turns on for the first five seconds that the alarm sounds.
•
The alarm sound changes over four levels as it sounds.
Stopping the Alarm
•
When alarm is sounding, press the
SNOOZE/LIGHT button
(
1
) to stop it. When the snooze feature is turned
on, the alarm will sound again in about five minutes.
•
To turn off the snooze feature, slide the
Alarm Mode selector
(
7
) to ALM OFF.
USING THE LIGHT
Pressing the
SNOOZE/LIGHT button
(
1
) turns on the light and illuminates the display for easy reading in the
dark.
Important!
•
Overuse of the light can shorten battery life.
AUTO LIGHT
•
You can configure the Auto Light feature to illuminate the display of the clock at a specific time.
•
The display will remain illuminate for six hours starting from the time you specify.
AUTO LIGHT button
(
3
)
Five seconds
NIGHT LIGHT indicator (
)
Normal Timekeeping Screen
Auto Light Off
Auto Light On
Alarm Time Set buttons
(
4
)
Alarm Time Set buttons
(
4
)