Clearplay CP-427-USB - Manual (Page 14)

- 10 -
sYsteM setUp MenU
you may access your DVD players settings menu at any time by pressing the SEtuP button on your remote control. If
pressed during playback the video will be paused. the setup menu consists of 6 categories displayed across the top
of the window. to switch between categories press the button until the current category is highlighted, then
press or to change categories. press the SEtuP button again to exit the menu.
sYsteM
clearplaY
enters the clearplay main menu (see page 16 for more
information.) to access the clearplay menu you must
first activate your player at www.clearplay.com/427.
tv sYsteM
sets the formatting for your television.
PAL - Most European televisions.
NTSC (Default) - Most American televisions.
AUTO - Attempts to automatically detect the best option.
aUto plaY
sets whether or not the player will automatically play
the disc when inserted into the disc tray.
ON (Default) - Player will automatically play inserted disc.
OFF - User will have to press PLAY to start playback.
video
selects between progressive and Interlaced playback.
progressive scan playback requires a supported
television and the use of of component or s-Video
cables.
INTERLACE-YUV - Standard interlaced playback.
P-SCAN YPBPR - High quality progressive scan playback.
S-VIDEO (Default) - Used with an S-Video cable.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
........
SYSTEM SETUP
CLEARPLAY
TV SYSTEM
AUTO PLAY
VIDEO
TV TYPE
PASSWORD
BLOCKING
DEFAULT
........
AUDIO SETUP
AUDIO OUT
KEY
........
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
........
tv tYpe
sets how the image will be formatted onto your
television.
4:3PS (Default) - Designed for most standard definition
televisions. If the DVD Supports it, this mode will
automatically zoom in on the video frame (cutting off the
sides) and pan and scan when appropriate.
4:3LB - Designed for most standard definition televisions.
This mode will maintain the full aspect ratio of the original
video (adding black bars to the top and bottom of the
frame.
16:9 - Designed for widescreen televisions. This mode
will give proper aspect ratio when using a widescreen
television.
password
allows a password to be set to protect the blocking
feature. the default password is 0000.
blocKinG
allows DVDs to be blocked based on the rating
encoded on the disc. some movies will not have a
rating on the disc, in these cases they will be blocked
at level 8.
defaUlt
RESTORE - restores DVD player to default factory
settings.