Char-Broil 463262811 - Manual (Page 23)

15
B
16
23
Place sideburner grate and griddle onto sideburner shelf.
Sideburner grate
Sideburner griddle
Release the cap and nut from electronic ignition module. Attach electronic ignition module to the cart right side panel with
back of the electronic ignition module. Total (2) connections, shown A.
electronic ignition module. Total (5) connections. Connect the two wires {(a) and (b)} from the switch wiring harness into the
Inside of cart, connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the
the nut, shown B.
Insert AA battery into ignition module, negative ( – ) end first. Then put on the cap, shown C.
+
-
ignition module
Electronic
Nut
Cap
NOTE: Switch terminals are larger than electrode
terminals and should only be installed in
location shown as (a),(b).
AA battery
Right side panel
B
C
A
Wire
1
2
3
4
5
(a)
(b)